Suction hose immuG KEHR Expert
The sweeper hose from Germany
immuG KEHR Expert was specially developed for use on sweepers and has proven itself both as a connection between the swiveling brushes and the collection tank, and as a free suction hose at the rear. immuG KEHR Expert is ideally suited for dry conveying of grit, sand, dust and other swept material.
These properties also make it interesting for other conveying tasks, such as the extraction of exhaust gases or vapors, when highly flexible hose routing is required.
Common dimensions can be found in our online-Shop for ordering from stock. Or contact us for your individual design.
Structure
- core: NR-SBR, green, red or black, abrasion resistant
- reinforcement: blended fabric with steel wire spiral
- cover: EPDM, black, fabric patterned, weather resistant
- wall profile: inside and outside corrugated
Technical data
- Pure suction hose with high vacuum resistance.
Reinforced version for slight overpressure possible. - Extremely bendable and flexible due to inner and outer corrugation.
- Long service life due to wear and notch resistant core with high tear resistance.
- Conductivity: not electrically conductive
- Temperature: -30°C to +80°C
- Weather resistant
Hose connection
- Spiral free sockets on both sides.
| inner Ø | wall thickness | vacuum | bending radius min. | max. length |
|---|---|---|---|---|
| [mm] | [mm] | [bar, rel.] | [mm] | [m] |
| 100 | 5,8 | -0,9 | 150 | 4 |
| 150 | 5,8 | -0,9 | 225 | 4 |
| 160 | 5,8 | -0,9 | 240 | 4 |
| 170 | 5,8 | -0,9 | 255 | 4 |
| 180 | 5,8 | -0,9 | 270 | 4 |
| 200 | 5,8 | -0,9 | 300 | 4 |
| 250 | 5,8 | -0,9 | 375 | 4 |
| 300 | 5,8 | -0,9 | 450 | 4 |